FDP-245 Horizontal Directional Drilling Rig

Home » Products » Drilling Rig » HDD Drill Rig » FDP-245 Horizontal Directional Drilling Rig
Main Drill Rig
Max. Feed Thrust/ Feed Pull 2450KN (550760 lbf) for this HDD Drill Rig
Feed Thrust/ Feed Pull System Ⅰ shift :9 m/min (29.6 feet/min)
Ⅱ shift :28 m/min (91.9 feet/min)
Rotation Driving of the Geological Drill Rig Gear transmission, step less speed regulating Ⅰshift hollow spindle torque:70000N·m(51590 lbf·ft) @42r/min Ⅱshift hollow spindle torque:35000N·m(25795 lbf·ft) @84r/min
HDD Drill Rig Motor
Manufacture power of Geological Drill Rig Weichai Power equipped with this Geological Drill Rig
Rated Value 450KW (640HP)
Operational State Dual Power System Working
Operator's Cab Equipped with Air-conditioner
Dimension and Gross Weight
Dimension(L×W×H) 14.5×3.15×3m (47.6×10.3×9.8 feet)
HDD Drill Rig Gross Weight 44 T(97020 lb)
Mast Entrance Oblique Angle 8°—16°
Environmental Standard and Service Engine Emissions and Noise Meeting EuropeanⅡ Standard
Drilling Tool for HDD Drill Rig
Drilling Rod Be Used "5 1/2"
Reaming Shell for Geological Drill Rig Ф325,Ф530,Ф660,Ф760,Ф900,Ф1100mm (Ф12.8,Ф20.9,Ф26.0,Ф29.9,Ф35.4,Ф43.3 inch)
Shackles Clamp Holder Centering by Itself
Clamper /Break-out Tong Distance adjustable with accurate, stable and reliable breaking-out
Max. Make-up Torque 90 KN·M (66330 lbf·ft)
Max. Break-out Torque 180 KN·M (132660 lbf·ft)
Crane On the Rig 3 T(6615 lb) Straight-arm Crane
Mast of HDD Drill Rig Length could be adjusted according to client's requirements
Hydraulic Mud Pump Full Hydraulic Driving, Flux Step less Adjustable.
Flux Rate of the Geological Drill Rig 0—1500 L/min(0-396 US Gallons/min)
Pressure of HDD Drill Rig 0—10 MPa (0-1450 psi)
Chassis Track Assembly Type
Accessory for HDD Drill Rig
Pressure, flux rate, revolution and other more than ten dates will be shown in figures. This is easy for analysis and judgment of problems and condition in the performance process.
Related Products
  • FDP-300 Horizontal Directional Drill RigMax Feed Thrust / Feed Pull 3000KN(674400 lbf)
    Feed Thrust/ Feed Pull System Pinion and rack type, moving with 6 gears driving with three-speed gear shift, step less speed regulating ...